ASNC 221

Distance Learning Capable: No, this room is not distance learning capable.
Wireless Casting: Yes, casting is available. Airtame software is required.
Touchscreen Display: Yes, on the desk is a Smart panel that you can control both screens 1 and 2 at the same time when using the Classroom PC in the cabinet.

To use the Classroom PC, on either the MT VIKI remote or the Switcher within the Cabinet, select Input 1
Then select each screen (Left and/or Right TV) that you would like to send the input to, Output 1 and/or Output 2.
Using the remote, Press Ok. Using the switcher, press Enter.

To use the Classroom Airtame, on either the MT VIKI remote or the Switcher within the Cabinet, select Input 4
Then select each screen (Left and/or Right TV) that you would like to send the input to, Output 1 and/or Output 2.
Using the remote, Press Ok. Using the switcher, press Enter.
On your laptop, ensure the Airtame application is downloaded. Ensure you are on the network source of Enterprise_secure.
Once installed, launch the software and search for ASNC 221.
Select Share Screen and on the TV(s), there should be a screen code for you to confirm you are connecting to the correct TV. (Enter the Code)

To use your personal PC, on either the MT VIKI remote or the Switcher within the Cabinet, select Input 3 (Podium)
Then select each screen (Left and/or Right TV) that you would like to send the input to, Output 1 and/or Output 2.
Using the remote, Press Ok. Using the switcher, press Enter.
Use the provide HDMI cable at the podium to plug in.

Display 1 input device controls that half of the room and Display 2 controls the other half of the room.
You can use the knobs on the wall to control volume levels or the computer that is sending the display/audio signal.
Audio is transmitted via the HDMI cable being used or AirTame device.